KF94( fish type) willow mask production line-kf94 mask machine-kf94 mask making machine-high speed kf94 mask machine

KF94( fish type) willow mask production line-kf94 mask machine-kf94 mask making machine-high speed kf94 mask machine

Short Description:

Quick Details Production Capacity: 1000pcs/min Voltage: 380V Applicable Industries: Manufacturing Plant After Warranty Service: Video technical support, Online support, Spare parts Condition: New Automatic Grade: Automatic Brand Name: ICT Place of Origin: Zhejiang, China


Product Detail

FAQ

Product Tags


Equipment technical description

Main technical parameters of equipment:

Name of equipment servo KF94( fish type) willow mask production line
Type       No. KF94
Production products Disposable adult KF94 fish mask products
Equipment performance parameters
ElectricityPressure Three phases     3 phases ;380V ;60Hz 3
Installed power About 50 KW (air compressor, specific power to be determined after manufacturing)
Product specifications Product Specification of 205*85 mm Disposable Adult KF94 Mask (Size according to Product Chart)
Design speed 800 tablets/min
Production speed 300-500 tablets/min (with the effect of ultrasonic compression as a reference)
Waste   Products       Rate ≦3%(Waste defective products from rubber machines, raw materials and refuelling joints are not equipment reasons
Open    Machine       Rate ≥85%
Gas supply pressure ≥0.7 Mpa
Dimensions (L ×W ×H ):12 m L ×W ×H 1.8 m L ×W ×H 2.2 m (reference dimensions) ultimately process-based
Equipment colour White
Weight About 12 tons (for information only)
Equipment orientation Right → left (facing equipment operating side)

Product structure, characteristics (subject to product drawings confirmed by both parties)

Serial number Material name Width Length Weight Roll diameter
1

Outer non-woven fabric

mm 210 mm 205

50 gsm

Ø700mm
2

Thickened electrostatic spray

mm 210 mm 205

gsm 25-50

Ø700mm
3

Thickened electrostatic spray

mm 210 mm 205

gsm 25-50

Ø700mm
4

Inner skin-friendly non-woven fabric

mm 210 mm 205

25 gsm 25

Ø700mm
5

Bridge of bridge

Ø0.3×4 mm 80 mm Ø500mm
6

Elastic earband non-woven fabric

170 mm 15*2 mm

90 gsm

Ø700mm

Structure and layout of equipment:

1.1 The wall and frame are fixed by frame welding, and the thickness of wall board ≧20 mm. after six-sided processing

1.2 Frame operation side bottom pedal using pattern pavement, neat and beautiful anti-slip.

1.3 Active uncoiling raw materials are in line parallel feed arrangement.

1.4 Equipment fan placed behind the equipment, using PVC pipe connection.

Main mechanical properties and characteristics of equipment

Outer non-woven fabrics supplied:

5.1          The double gas flatulence material shaft is used alternately automatically, the material shaft adopts 1 to 1 frequency conversion active unwinding control;

5.2          Automatic constant tension storage device;

5.3          Automatic material cutting device;

5.4          Material detection, automatic alarm shutdown;

5.5          Material intermediate joint detection, automatic waste removal;

5.6         Equipped with automatic rectifying device 1, width 250 mm.

5.7         Raw material size: width 210 mm, diameter ≤700 mm, core diameter 3 inches

Main original equipment configuration:

No. serial number

Functional element Name

Brand Brand

1

Main Touch Screen

Mitsubishi Japan

2

PLC

3

Servo Motor

4

Rectifier (6 sets)

Rayton

5

Detection elements

SICK/SUNX

6

Temperature control system

OMORON (Omron)

7

Low voltage electrical components

SCHNEIDER( Schneider)

8

Cylinder

AIRTAC

9

Pneumatic components

AIRTAC

10

Flat conveyor belt

ESBELT of imported materials

11

Synchronous belt

Volon dragon

12

Bearing

Except NSK (seat bearing)

Random files:

Serial number

Name of file

Quantity

Serial number

Name of file

Quantity

1

Flow chart of transmission system

1

3

Electrical schematic

1 copy

2

Production line instructions

1 copy

4

Servo Manual

1 copy

Agreed acceptance

1. In the case of the buyer’s technical acceptance personnel arriving at the supplier’s acceptance site, the specifications and shapes stipulated in the contract shall be tested / accepted. The raw materials used for acceptance shall be provided by the supplier.

2. The personnel of the buyer shall participate in the acceptance of the equipment on time according to the schedule and requirements of the supplier, and run continuously for 15 minutes according to the specifications and speed stipulated in the contract as the acceptance method. The raw materials used for more than 15 minutes shall be provided.

3. Acceptance rate 85, finished product rate of more than 97% can pass the acceptance. After acceptance, both parties sign the equipment acceptance report in duplicate. Signed acceptance report form as the basis for supplier delivery.

Before the acceptance of the equipment, the supplier will notify the buyer in writing to prepare for the acceptance. If the person in charge of the buyer (the contract signatory) fails to arrive at the supplier to participate in the acceptance, The buyer shall send the designated person in charge and notify the supplier in writing of the contact information and ID number.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Products categories